Before we start to know about How to select the best projector for home theater in India? If you’ve got specific questions on your setup, we strongly recommend you comment on the blog, so that we will try to help you.

In this blog, we’ve covered the fundamentals and more in “How to select the best projector for home theater ?”. For any new technology update, people can inspect our latest post here.

How bright should my projector be?

Projector brightness is measured in ANSI lumens*. home theatre projectors start from 1000 lumens and goes upto 2500 lumens and more. Your viewing environment is that the deciding factor on what percentage lumens your projector needs. The best projector for home theaters (rooms with controlled lighting and no ambient light) won’t require the maximum amount of brightness as an area with ambient light from windows or another household lighting.

Projector People recommends the subsequent lumen outputs:

  • Best home theaters for home theater needs 1000 lumens or brighter.
  • Rooms with some ambient light should have a minimum of 1500 lumens.
  • Home with high ambient light needs about 3000 lumens.
  • Check out the video below to ascertain a 1600, 2000, and 2500-lumen projector during a side-by-side comparison.

How to select the best image quality in the projector?

The three most vital factors affecting image quality are native resolution, your source material, and therefore the projector’s contrast ratio.

Currently, Wide XGA (1280 x 800) and HD (1920 x 1080) are the foremost common home theatre projector resolutions. An HD (1920 x 1080) projector has about twice the amount of pixels of a good XGA projector. Higher pixels mean a sharper looking image and better compatibility with high-definition sources.

Most popular home theatre projector resolutions

  • Wide XGA 1280 x 800 1,024,000 total pixels
  • HD 1920 x 1080 2,073,600 total pixels

What you’re watching will make an enormous difference within the quality of your image. A low-quality signal fed to your projector will presumably appear as if a low-quality image when projected. this is often even more noticeable on a bigger screen.

For best results, you ought to attempt to match the projector with the native resolution of your source material. Users Blu-ray player, PlayStation 3, and Xbox 360 give a 1080p signal. HDTV signals are still not totally standardized, although 720p and 1080i seem to be the foremost common.

HD (1920 x 1080) projectors are designed to deliver all the rich details carried during a 1080p signal. Wide XGA projectors will provide the best results when fed a 1080p signal, just not as great as their HD counterparts. That said, you would be hard-pressed to inform the difference between the 2 unless you were projecting a really large image, say eight feet diagonal or more.

The final factor to think about maybe a projector’s contrast ratio. Contrast ratio literally refers to the difference between the blackest black and therefore the whitest white in a picture.

A projector having a contrast ratio of 10000:1 isn’t necessarily five times better than one with a 2,000:1 ratio. The contrast ratio doesn’t account for a way the projector displays all the reminder grey in between the blackest black and whitest white. If the projector can’t display those reminder gray, portions of the image will “blow-out” and appear pixilated when displayed on the large screen. search for projectors with more control settings. Multi-color processing technology like Brilliant Color and sRGB modes will allow you to actually tweak the projector’s display to your liking.

What is the native aspect ratio?

Because projectors are a hard and fast resolution display device, they need what’s called a native ratio. the foremost common aspect ratios for projectors are 4:3, 16:10, and 16:9. meaning that the chip inside the projector is formed within the specified 4:3, 16:10, or 16:9 proportions. consider the chip as a miniature version of the image you’ll see on your screen.

Ceiling Mounting

Ceiling mounting your projector will catch on out of the way, creating a more polished search for your viewing area while also keeping your projector secure. Mounting the projector during a fixed area also will prevent the time of fixing your projector for every use.

If you propose to ceiling mount your projector, you’ll get to know the fixed distance between the projector and your screen. this is often because different projectors have different throw ratios. Throw ratio is the relationship between the projector’s distance from the screen and therefore the width of the image. for instance, if your projector is going to be ceiling mounted 10 feet faraway from your screen, your image is going to be larger than if your projector is merely five feet away.

Table Top Projection

Most video projectors weigh but 20 pounds and are easy to move from location to location. meaning you’ll take your ‘big screen TV’ with you to the homes of friends and family, or host an outside movie projected on the garage door with none work. However, you’ll need to found out your projector for every use, and your primary viewing area won’t have the polished look of an installation. If you opt that tabletop projection is true for you, consider a projector with less fan noise. Aim for around 30dB or less for ‘whisper quiet’ fans. you’ll also want to think about the general product’s exterior design since the projector is going to be visible.

How to choose best projector apart from the above requirement?

DEEP Color

In 2008, the HDMI consortium released a replacement standard that supports DEEP Color. Previously, HDMI cables only supported 8-bit color, which supplied a measly 16.7 million colors. DEEP Color supplies 10, 12, and 16-bit abilities, up to 2,800 trillion colors. This drastically increases the amount of reminder each color, virtually eliminating banding. search for projectors that support DEEP Color or say they’re HDMI 1.3a (or above) compliant.

Frame Interpolation

The average film is shot at 24 frames per second or 24p. this is often relatively slow compared to the typical television program, shot in 30p, or 1080i HDTV, a whopping 60p.

However, there are times when these speeds aren’t fast enough, especially on the massive viewing area provided by a projector. To accommodate this, newer home theatre projectors use frame creation (AKA frame interpolation) technology. These smart projectors analyze the differences between frames and insert new frames in between. The new frames adjust the image in order that fast-moving objects sort of a racer or a ball flying across a field appears halfway in between their locations on the first frames. These new frames make the ball or car appear to maneuver more fluidly across an outsized display.

What else?

Then there are in fact, the small things. the items that cause you to love technology. the things you show all of your friends while their jaws drop and say, “Wow!”

Conclusion for How to select best projector for home theater?

  • Multiple ratio support
  • Picture-in-picture or picture-by-picture
  • Cinema mode for richer color and quieter fan
  • Backlit remote
  • Lens shift and 2x zoom for easier installation
  • Internal scalers
  • Screen triggers for remote operation of electrical screens
  • 120Hz refresh rate
  • 50,000:1 or higher contrast ratio
  • 4,000 hour or longer lamp life

Leave a Reply

Your email address will not be published. Required fields are marked *